Hooking up 5 1 surround sound to computer

Photo Credits headset image by Dron from Fotolia.

How to test surround sound

Turn on the stereo and select the music source on the front panel. Do not use older, non-powered speakers with your computer as they are not amplified and do not produce enough volume. If the home stereo system has four speakers, buy two Y adapter cables. Plug the other end of the cable into the black port on the subwoofer, next to the green port. Click Set Default, and then click OK. Following the directions that came with the speakers, connect the speaker wires between each speaker and the subwoofer, making sure to connect each speaker wire into the matching port. In this tutorial we will show you a step-by-step guide on how to connect analog 5. Go to a home electronics store and purchase a Y adapter cable of the proper length. Plug the computer end of the cable into the headphone jack on your computer. The steps described there are just the same, but instead of connecting your PC to a home theater receiver you will be connecting it to a digital 6-channel speakers system. Connect the sound cable with green connectors into the Primary Front Speaker Out port on the back of the computer. He earned his Bachelor of Arts in media and game development and information technology at the University of Wisconsin-Whitewater. Configuring stereo speakers built into the monitor Depending on the monitor, you might need to connect an audio cable, or both an audio cable and an HDMI cable.

Use the following steps to connect the sound cables to the monitor. What is a 5.

How to connect laptop to surround sound system

Connect the other ends of the Y adapter cable into the Center and Subwoofer inputs on the back of the stereo receiver or amplifier in the section labeled DVD, Surround, 5. Click Set Default, and then click OK. Determine the length of cable you need. Connect the sound cable with green connectors into the Primary Front Speaker Out port on the back of the computer. For example, buy three cables for a 5. Turn on the stereo and select the music source on the front panel. Reposition your computer so you can access the back connections panel. Place the rear left and rear right speakers behind the listening area. Setting the default sound device Windows outputs sound to only one device at a time. Do not use older, non-powered speakers with your computer as they are not amplified and do not produce enough volume. Configure the sound settings using the steps in Setting the default sound device.

There may be a few jacks; the headphone one is usually green. Plug the other end of the cable into the receiver. At the other end, the cable will have two RCA-type plugs red and white.

Setting the default sound device Windows outputs sound to only one device at a time.

How to connect 5.1 speakers to laptop

Configuring stereo speakers built into the monitor Depending on the monitor, you might need to connect an audio cable, or both an audio cable and an HDMI cable. If the home stereo system has a 5. Locate the audio connections for your surround sound speakers RCA or optical. Making alternate connections You might want to connect your desktop computer to a television to view photos, watch Internet videos, or surf the Web. Connect the other ends of the Y adapter cable into the Rear Left and Right inputs on the back of the stereo receiver or amplifier labeled DVD, Surround, 5. To set up an HDMI digital connection, use the following steps: Turn off the stereo receiver or amplifier. Turn it off and unplug it, if necessary. Connect the audio cable to the green Speaker Out port on the back of the computer. Be sure to match red to red and white to white. Plug the other end of the cable into the receiver. Configuring four speakers front and rear pairs Use the following steps to connect four speakers to the computer: Position the speakers.

Connect the sound cable with green connectors into the Primary Front Speaker Out port on the back of the computer. Connect the cable into the Digital Out port on the back of the computer.

how to connect 5.1 speakers to pc realtek

Select the input to which you connected the Y adapter. Plug the speaker cord into the electrical outlet and turn on the speaker system. Make sure there is a free set of inputs on the back of your stereo.

5.1 sound card for pc
Rated 10/10 based on 70 review
Download
How to get speakers to work on my PC